Ericsson MD110, TAPI configuration using Estos ECSTA Tapi driver

If you are using an Ericsson MD110 with Estos ECSTA TAPI driver, this is how you configure it.

It can be downloaded from here:

http://www.estos.com/produkte/ecsta/ecsta_ericsson.htm

Run the installation. When done enter the phone and modem dialog and add the TAPI service provider.

Set the IP-adress / host adress to the server / application link (note! It's not the adress of the PBX!!!)

Select what line or span of lines you should use. Typically you just use one line.

When it's created you can see it here.

Click ok and you are done. Verify with some TAPI tool such as our TAPI tester or WorkMan Agent.